Loading... Please wait...

Our Newsletter

S8910U 1000 HSI CONTROL MODULE - S8910U1000

  • S8910U 1000 HSI CONTROL MODULE - S8910U1000
  • S8910U 1000 HSI CONTROL MODULE - S8910U1000
1.00 LBS
Calculated at checkout
Bookmark and Share

Product Description

S8910U 1000 HSI CONTROL MODULE - S8910U1000

Universal Hot Surface Ignition Module is designed to provide easy field replacement of a wide range of hot surface ignition modules manufactured by Honeywell, Robertshaw and White-Rodgers. The S8910U Module provides operating control of a direct ignition system using a 120 Vac hot surface igniter.


    Replaces many White-Rodgers, Robertshaw and Honeywell hot surface ignition models.
    For 120 Vac (up to 5.0A) surface igniter (Norton 201/271 or equivalent).
    For local (single rod) or remote (dual rod) rectification type flame sensing.
    Contains easy-to-use instructions plus the accessories required to adapt the existing hot surface ignition module.
    Provides one or three ignition trials (four-second or seven-second trials) per call for heat; prepurge of 32 seconds or less; up to 96 seconds between purge trial times.
    Temperature range is -40 to +175 F (-40 to +79 C).

Replaces Old Numbers:  

085267141246, 1001346, 21N34, 21N34-S8910U100, 50E47-150, 50E47-170, 50E47-50, 50E47843S1, 50F47-060, 780-784, 786710006500, 786710111235, H1001346, S890C1007, S890D1006, S890G1003, S890G1011, S890G1029, S890G1037, S890H1002, S890H1010, S890H1028, S89C1004, S89C1012, S89C1046, S89C1079, S89H1011, S89H1029, S89J1008, W609192, W619033


    Description: Provide electronic control of direct hot surface ignition systems used on gas fired furnaces, boilers, and other heating appliances.
    Ignition System Type: Direct Hot Surface Ignition
    Ignition Sequence: The number of trials for ignition and trial time is determined by the selection tab. If a selection tab is not installed, the module will operate at four seconds trial time and one ignition trial.
    Typical Gas Control: VR8205, VR8305
    Type of Gas: Natural or LP
    Flame Sense: Single Rod or Two rods
    Ignition Source: Line Voltage (120 VAC) Hot Surface Element (Norton Model 201 or 270)
    Prepurge: 32 Seconds
    Ignition Trials To Lockout: 1 or 3
    Lockout Timing: 4 Sec. or 7 Sec
    Ignition Trial Time: 4 sec. or 7 sec.
    Maximum Valve Load @ 24 Vac (Amps): 2A
    Typical Ignition Hardware: Norton 201, Norton 271, Q354A
    Dimensions: 5 1/4 in. high x 4 1/16 in. wide x 1 15/16 in. long
    Electrical Ratings: 24 Vac
    Frequency: 60 Hz
    Max Ambient Temperature: -40 F to +175 F
    Between Trial Time: (2) 96 sec. – 3 trial mode only
    Flame Failure Response Time: 1.5 sec

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the S8910U 1000 HSI CONTROL MODULE - S8910U1000 to your wish list.

You Recently Viewed...